One Sixth Warriors Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi everyone

fairly new to thus scene since august 2020.

does s as by one have any tutorials about how to tie a gentleman’s neck tie for a figure?

many thanks
 

·
Frick 'n' Frack
Joined
·
348 Posts
My suggestion is to buy a clip on tie as a pattern Taking pictures deconstruct it documenting every step. once you have done this just scale a strip of material to make a tie. Since the cut parts will be mostly hidden you can go about making one. Use a formula of reducing the real tie length to 1/6 scale. The hard part will be finding fabric/material to use which is either thin enough or with tiny pattern to make the tie. Thin silks would work great. You can even go so far s to buy a 1/6 scale tie as a pattern. My suggestion is using an elastic card to go under the collar. You can do either one. You also might actual find a real tie with a suitable pattern texture to use. I would pull out the lining material. If you iron the folded over section it should give you a crisp edge. Hope this helps.
 
1 - 3 of 3 Posts
Top