One Sixth Warriors Forum banner
1 - 16 of 16 Posts

·
One Sixth Junkie
Joined
·
6,325 Posts
Discussion Starter · #1 · (Edited)
Elfbait has finished with his new BH. Revisions, revisions and more revisions. Now he has made just 1 of these and has to renovate the other 3...when he will finish the 3...I don't know...sorry... As I have said, Kim or elfbait is a medical doctor and is very busy.

This will be very expensive for most, so please don't contact me if you were expecting this to be a couple hundred dollars. The resin costs alone were a couple hundred dollars. We do take installments. Please contact me and not elfbait if interested.

Fast Rope Insertion Extraction System (FRIES) actually works! The M1e4D is totally revamped, as well as the spent cartridge chute, which is now articulated and actual mount system for the Blackhawk! Swivels in all directions. The gunner seat has been revamped and improved with parachute material that has been stitched on to the metal seat! Ceiling of the BH has metal wires and communication wires going throughout the cabin and can hook up for two crewmen! Hydraulic brake fluid lines to the wheel! Enough space to hold at least 6 of your figures!
This has been redone to make it more accurate to the real Blackhawk Helicopter! Took months of revision!

https://www.onesixthwarriors.com/fo...gallery_image&id=189560&gal=gallery&type=full
https://www.onesixthwarriors.com/fo...gallery_image&id=189578&gal=gallery&type=full
https://www.onesixthwarriors.com/fo...gallery_image&id=189580&gal=gallery&type=full
https://www.onesixthwarriors.com/fo...gallery_image&id=189584&gal=gallery&type=full
https://www.onesixthwarriors.com/fo...gallery_image&id=189586&gal=gallery&type=full
https://www.onesixthwarriors.com/fo...gallery_image&id=189576&gal=gallery&type=full
https://www.onesixthwarriors.com/fo...gallery_image&id=189582&gal=gallery&type=full
https://www.onesixthwarriors.com/fo...gallery_image&id=189572&gal=gallery&type=full
https://www.onesixthwarriors.com/fo...gallery_image&id=189574&gal=gallery&type=full
https://www.onesixthwarriors.com/fo...gallery_image&id=189566&gal=gallery&type=full
https://www.onesixthwarriors.com/fo...gallery_image&id=189588&gal=gallery&type=full
https://www.onesixthwarriors.com/fo...gallery_image&id=189590&gal=gallery&type=full
 

·
One Sixth Junkie
Joined
·
6,325 Posts
Discussion Starter · #11 · (Edited)
Re: Elfbait's New Blackhawk Helicopter

Thank you all for responding. Kim has just made the ACME M134 Ammo Canister for his M134D for the Blackhawk Helicopter. This is a bad a**! Now this looks like metal, but actually it is done in resin as most of his things.




 
1 - 16 of 16 Posts
Top