Takara male Jin-Roh photo review.

I was going to post them in the other picture thread I posted but I didn't think I'd take so many pictures. So I figure this deserves it's own thread.

So here's the Takara Male body... as nude as I dared make him. I recently had some issues with some CG 1.0 bodies having the ankle joint crack on me so I had no interest in taking off his boot-feet in order to get his pants off.



You can see his elbows have excelent movement. I especially like the elbow which gives you a vary natural elbow point when the arm is full bent, something most 1/6 figures do not do.



Now I have one fairly sizable issue with this very expensve issue. Maybe I just got a skrewed up one or something since I've never had this issue with any Takara stuff before. The fit on his jacket is really, really bad. It's far too tight. It's pretty bad in the body, all stretched out weirdly, even inhibits movement some.



Now that's nothing compared to how badly it screws up the arm and shoulder movement. This photo depicts as high as his arm can raise and as tights as his arm can bend. Compare that to the nude arm and the arm in a black long sleeve shirt I had laying around. Both nude and in the shirt his shoulder maintains full movement.





So I decided to swap his leather jacket for the black shirt... which will be almost entirely covered by his gear so who cares what it looks like?

Here he is with all his non-armor pieces on... sans jacket.



His vest on...



Most of his hard armor on, only missing his helmet.



The detail work on the mask is very nice, better than the chick's if you ask me. There's a lot more stuff going on and I love the furrowed brow.




Again, more great detail... in an area you'll never really see There's this cool connector ring on his back armor that matches up with his back pack.




Also the ammo drum is removeable from the backpack, has two places to store spare barrels for his machine gun, and a handle to carry it by.




This pose with the arms so close to the body would be impossible if he was still wearing that stupid jacket.



Same goes for this pose with his arms raised high and his right arm very tightly bent to his body.






I don't get the jacket issue. Midori's jacket fits great.

I never had any problems with the jacket, must have been a freak occurrence.

Very nice photo review, thanks.
What is the alternative mask he's wearing in the subliminal Gif image?

James

Hah, my name is James as well. It's a Joe ski-mask a friend of mine sent me with a bunch of stuff. One of these days I'm going to repaint it and use it for something.

Takara's Panzer Cops are simply one of the best 1/6 figures ever created imo.

Nice photos. I thought my eyes were seeing things with the subliminal gif image.

That is an awesome looking figure!!!

This figure looks unbelievable. The pics aren't bad, either.

Are there any shops still selling this figure?

I want this fig, but i dont have the $$ for it.

crisp clear-images and great review - thanks for the trouble! :)

i really dig the shirt sub... great work!

Great photos! It is one of the best figure ever produced. I still can't resist to look at it every time it is within my sight.

Sweet figure! I would never have guessed they would issue such a small jacket...

Thanks for sharing!

I used a In the Past Toys black long sleeve t-shirt. One of these days I want to replace both the chick and the guy's blak uniform with an olive drab uniform to better match the film.

Nice review. i am so glad i preordered this guy last year.

that Takara GEN-X Core body has got to be one of the best 1:6 male bodies ever made.

my major complaints with this figure set would have to be:

the head is like 1:8 scale! way too small to ever be used outside of the helmet. but i can understand why they chose to do this. so that the head would fit inside the helmet and not end up looking like the inflated melon on the HT SDU Tactical guy with his helmet on (no joke you can almost fit 2 heads inside that PASGT helmet).

Takara still insists on using those dumb elastic straps on EVERYTHING. they just look way too cheap for such a high end figure. its really a pain swapping all those out for quality webbing or leather.

otherwise everything else on the figure is TOP NOTCH

I dont know if you have or have seen this figure in person. But Its proportioned pretty well. I think the issue of the head being too small arises when he has the full body gear on including the chest plate, but thats pretty much understandable since even in the movie itself, Jin Roh's head is a little bit unproportioned.


The fact that he has a baggy leather pants doesnt help either. It really does make his upper body look small. But I can live with tha because it helps the figure take advantage of its Gen X core.

I've contemplated swapping on the straps on mine for leather straps but geez pricing equipment straps for loose parts dealers it would cost me nearly the price of a whole new figure to replace them all. Have you found any better solutions? I know I could buy leather myself... but the buckles are a problem.

Nice review, if I could afford it.. Ok if I give into the temptation, I'd like to snap this figure up. Looks well worth it for the fun and cool factors. Too bad about the tight jacket, your substitute looks great though. I like the jacket's fit. Could probably rig up some sort of assassin or anime-styled figure off of it. Alas, my Midori is still trapped in her shipping box! :P

Duno what you could use for the buckles, but you could probably buy leather remnants for pretty cheap prices at Hobby Lobby. They might have something buckle-ish and in scale too.

Thanks for the detailed pix, dedguy. This is one fig I've been eyeing from time to time, but never could commit to it. :)

This has got to be the best pic review! And changing the jacket is a brilliant idea. Will do the same with mine soon. Thanks dedguy!

No problem. Like I said on MWD the only thing really bugging me is that I only have two of them. Things really should come in threes damnit. I keep contemplating ways to do a kitbash. The wall I keep running into is that in order for him/her to really feel like part of the Kerberos Cops they need one of those gas masks which isn't something easily bashed.

i HOARD those metal DML buckles that come with every one of their guns like acorns to a chipmunk in late autumn. i even try to buy up loose guns for really cheap when i find them, use the gun for parts and strip the buckles and put them into my "buckle container"

however, i havent tried this yet, but ive seen someone on here that made their own metal buckle from bending paper clips with a small set of pliers.

michaels sells leather strips that is even pre-cut to the right size. its even spun on a spool.

Someone on MWD gave me these links:

http://www.riorondo.com/
http://www.tinyzippers.com/dollbuckles.html

I can't find this figure on HLJ. I've found the takara female and a medicom male. Help?

Lots of the Takara Male Jin Roh onsale in Singapore's Yahoo Auctions. Where r u located Withakungfugrip?
________
Laguna Bay Condominium Pattaya

If you can wait long enough Takara is re-releasing them with new headsculpts in June:

Whoa cool news. So now we will be able to buy multiple Jin Roh figures with different heads.

They're being re released?
Arrrgghh!
Must. not. cave. in!

I don't know if they're being considered as re-releases by Takara or new figures. I would have preferred seeing a new design or at least different accessories like the custom anti-armor rifleman shown at Wonderfest.

I want one of these... too bad the rereleases don't have a Wolf Brigade Kazuki Fuse headsculpt... I'd really like that.