One Sixth Warriors Forum banner

Need tips on dust proofing a glass cabinet

3K views 1 reply 2 participants last post by  The_Dutchman 
#1 ·
I have a double door glass cabinet that need some dust proofing, here's some pictures:
1. Front gap(±6mm).


2. Side(±6mm) & top(±7mm) gap - closed.


3. Side(still ±6mm) & bottom(±4mm) gap - closed.


4. Side & top gap - opened(I don't think this matters since the doors are closed most of the time anyway).


5. Side & bottom gap - opened(I don't think this matters since the doors are closed most of the time anyway).


I'm thinking of framing the inside of the glass for the side & bottom gaps, and the ceiling for the top gap, not sure what to do with the front/door gap. Now the material, which is flexible enough so it won't hinder the door's articulation; brush seal(it looks like a strip of yarn/hair) or foam/sponge weather strip(is there any difference between foam & sponge?)? Also, which is better for the strips, too thick or too thin?

Thanks for your time.
 
See less See more
5
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top