Dulling down oil paints

Collect. Kitbash. Customize. Community. Showcasing the Best of Sixth Scale Modeling.

Results 1 to 3 of 3

Thread: Dulling down oil paints

  1. #1
    Join Date
    May 2017
    Posts
    2

    Dulling down oil paints

    Hi everyone, can anybody advise what to use to use to dull down oil paints that have dried with a shine. I have heard reference in previous threads to dullcote and was wondering if this was a specific brand or just a generic term.

    I paint with artist oils over humbrol enamel base colours. I currently have some humbrol Matt cote and some life colour acrylic Matt cote and was wondering if either of these would work ( would the enamel based humbrol react with the oil paint and start lifting it or would the acrylic be able to key to the oil finish?).

    I would also like to know if I should apply the Matt cote once I have completed the figure or would I be able to do the affected area without it causing me issues when I come to paint the unaffected areas.

    Any advice would be greatly appreciated.

    I didn't find the right solution from the Internet.

    References: Dulling down oil paints | planetFigure | Miniatures


    Explainer Video Example


  2. Remove Advertisements

    Advertisements
     

  3. #2
    Join Date
    Aug 2007
    Location
    Lubbock, Texas
    Posts
    2,436

    Re: Dulling down oil paints

    Testors Dulcote will do exactly what you want. I've used it for a looooooooong time.
    "I need your clothes, your boots, and your motorcycle."
    Trade feedback:
    https://www.onesixthwarriors.com/foru...ghlight=spyder

  4. #3
    Join Date
    Jul 2018
    Posts
    72

    Re: Dulling down oil paints

    I used to use oils for everything and found that a few little hints would help matt the pigment down

    i would do a base coat of acrylic in a colour to match the oil so that it had a good base to adhere too and so that there was an even coat because of the thin nature of the oil paint

    Before using the oil I would leave the paint to be used from the tube on a piece of old cardboard, this will draw the oil from the paint into the card. You can leave it for days and then use refined white spirit to thin the pigment down , this helps tone down the paint, the more thinner, the better dull finish you will get

    oils take an age to dry but once fully dried out Matt coats can be used to get a total dull finish. Oils are idea for skin as without matting agents you will always get a small amount of shine, just like the real thing

Similar Threads

  1. Finished HS Re-Paints
    By crusader1xxx in forum Sixth Scale Action Figure News, Reviews, & Discussion.
    Replies: 4
    Last Post: 03-06-2008, 23:30
  2. The best paints to use
    By TwoTwelths in forum Sixth Scale Action Figure News, Reviews, & Discussion.
    Replies: 9
    Last Post: 09-07-2006, 15:13
  3. Need help with paints........
    By Cwatson in forum Sixth Scale Action Figure News, Reviews, & Discussion.
    Replies: 2
    Last Post: 06-24-2005, 12:55
  4. Acrylic Paints
    By 87th Cav. Recon in forum Custom Tips & Techniques
    Replies: 0
    Last Post: 03-29-2003, 20:35

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Dulling down oil paints
[X]