This project requires many fit and cut procedures. It takes a lot of measuring and checking for fit and most of all.....patience.
Let's begin. Nurse! Scalpel!!!
We'll start with the front end:
A channel must be cut/filed/ notched for the sterring bar that connects the front wheels.PATIENCE!
To make up the difference, a 1/2 inch spacer will be needed to keep the axle in place.
NOW FOR THE REAR WHEELS:
OK!! Don't know if you can notice, but the height difference makes the Humvee look way bigger!!!
Let's begin. Nurse! Scalpel!!!
We'll start with the front end:
A channel must be cut/filed/ notched for the sterring bar that connects the front wheels.PATIENCE!
To make up the difference, a 1/2 inch spacer will be needed to keep the axle in place.
NOW FOR THE REAR WHEELS:
OK!! Don't know if you can notice, but the height difference makes the Humvee look way bigger!!!