Sawgunner
02-04-2004, 22:05
This project requires many fit and cut procedures. It takes a lot of measuring and checking for fit and most of all.....patience.
Let's begin. Nurse! Scalpel!!!
We'll start with the front end:
https://www.onesixthwarriors.com/photo/data/592/imagew2.jpg
https://www.onesixthwarriors.com/photo/data/561/trimaxle1.jpg
https://www.onesixthwarriors.com/photo/data/592/angleaxle1.jpg
https://www.onesixthwarriors.com/photo/data/592/frontwheelwell6.jpg
https://www.onesixthwarriors.com/photo/data/561/frontwheelwell3.jpg
https://www.onesixthwarriors.com/photo/data/592/frontwheelwell7.jpg
https://www.onesixthwarriors.com/photo/data/561/frontwheelwell4.jpg
https://www.onesixthwarriors.com/photo/data/592/frontwheelwell8.jpg
https://www.onesixthwarriors.com/photo/data/592/frontwallgone1.jpg
A channel must be cut/filed/ notched for the sterring bar that connects the front wheels.PATIENCE!
https://www.onesixthwarriors.com/photo/data/592/channel1.jpg
https://www.onesixthwarriors.com/photo/data/592/channel2.jpg
https://www.onesixthwarriors.com/photo/data/592/channel4.jpg
https://www.onesixthwarriors.com/photo/data/592/channel3.jpg
https://www.onesixthwarriors.com/photo/data/592/rodinchannel.jpg
https://www.onesixthwarriors.com/photo/data/592/posthole2.jpg
https://www.onesixthwarriors.com/photo/data/592/posthole1.jpg
https://www.onesixthwarriors.com/photo/data/592/posthole3.jpg
To make up the difference, a 1/2 inch spacer will be needed to keep the axle in place.
https://www.onesixthwarriors.com/photo/data/592/postspacer1.jpg
https://www.onesixthwarriors.com/photo/data/592/Spacer.jpg
https://www.onesixthwarriors.com/photo/data/592/Spacerdone.jpg
NOW FOR THE REAR WHEELS:
https://www.onesixthwarriors.com/photo/data/592/imagew21.jpg
https://www.onesixthwarriors.com/photo/data/592/reartiretext41.jpg
https://www.onesixthwarriors.com/photo/data/592/rearconnector1.jpg
https://www.onesixthwarriors.com/photo/data/592/rodtext3.jpg
OK!! Don't know if you can notice, but the height difference makes the Humvee look way bigger!!!
https://www.onesixthwarriors.com/photo/data/592/sidebyside1.jpg
Let's begin. Nurse! Scalpel!!!
We'll start with the front end:
https://www.onesixthwarriors.com/photo/data/592/imagew2.jpg
https://www.onesixthwarriors.com/photo/data/561/trimaxle1.jpg
https://www.onesixthwarriors.com/photo/data/592/angleaxle1.jpg
https://www.onesixthwarriors.com/photo/data/592/frontwheelwell6.jpg
https://www.onesixthwarriors.com/photo/data/561/frontwheelwell3.jpg
https://www.onesixthwarriors.com/photo/data/592/frontwheelwell7.jpg
https://www.onesixthwarriors.com/photo/data/561/frontwheelwell4.jpg
https://www.onesixthwarriors.com/photo/data/592/frontwheelwell8.jpg
https://www.onesixthwarriors.com/photo/data/592/frontwallgone1.jpg
A channel must be cut/filed/ notched for the sterring bar that connects the front wheels.PATIENCE!
https://www.onesixthwarriors.com/photo/data/592/channel1.jpg
https://www.onesixthwarriors.com/photo/data/592/channel2.jpg
https://www.onesixthwarriors.com/photo/data/592/channel4.jpg
https://www.onesixthwarriors.com/photo/data/592/channel3.jpg
https://www.onesixthwarriors.com/photo/data/592/rodinchannel.jpg
https://www.onesixthwarriors.com/photo/data/592/posthole2.jpg
https://www.onesixthwarriors.com/photo/data/592/posthole1.jpg
https://www.onesixthwarriors.com/photo/data/592/posthole3.jpg
To make up the difference, a 1/2 inch spacer will be needed to keep the axle in place.
https://www.onesixthwarriors.com/photo/data/592/postspacer1.jpg
https://www.onesixthwarriors.com/photo/data/592/Spacer.jpg
https://www.onesixthwarriors.com/photo/data/592/Spacerdone.jpg
NOW FOR THE REAR WHEELS:
https://www.onesixthwarriors.com/photo/data/592/imagew21.jpg
https://www.onesixthwarriors.com/photo/data/592/reartiretext41.jpg
https://www.onesixthwarriors.com/photo/data/592/rearconnector1.jpg
https://www.onesixthwarriors.com/photo/data/592/rodtext3.jpg
OK!! Don't know if you can notice, but the height difference makes the Humvee look way bigger!!!
https://www.onesixthwarriors.com/photo/data/592/sidebyside1.jpg