Well...this was not my intention when I first started this thread, but it turn out everybody wants to see what fits where. I would greatly appreciate if someone who has figures could tell me what fits where.. Your name will be included on the first page. I will try my hardest to get them into the thread, but most (about 90%) of my figures are in storage right now, therefore I don't have them readily available right now, so I can't inform the readers.
These pictures are all from the net. It's too much trouble to strip down my figures to nudes. If I made a mistake please let me know. If you know or have better pictures of nudes, please send the picture or know of a website with picture it will be greatly appreciated. Unfortunately, I only collect men. Because I've never heard of a woman Navy Sealer or a woman in the special forces. If I'm wrong, please accept my apologies, but you have got to send me pictures.
1-Pale, 2-Slightly Pale, 3- Regular Skinned, 4-Tanned, & 5-Very Tanned/Dark
1-Not Very Posable ~ 5-Very Impressive Posablity
1-Loose Joints ~5-Very Stiff Joints
1-Would Not Buy, 3-Maybe, 5-Definitely Would Buy Again
ACE MK-1 Body 3/4/4/5/4.5: Solid and ruggedly built. My problem is the part where the upper chest mets the stomach, is way too loose! His right knee is not as tight as his left knee, but may be due to manufacturing defects. Overall I give a big thumbs up! I would have to rate this as the second best body I have come across. Others have complained that the clothes don't fit him due to his as~ and chest being bigger than most. I have not found this to be the case, but I only have one MK-1 body and he's wearing HT pants. Granted it was a tight fit, and he's even wearing boxers, but I managed to button him up. He is a tad taller than most of the figures out there. The HS/Neck Post fits bbi/HT bodies. The hand pegs should fit the long narrow type, or bbi hand pegs.
ACI Body 1/4/5/5/4.5: cdn rhino hit it on the nose! It is a clone of the HT TT! The joints are tighter on these babies except the torso, but these are very, very tight joints. Especially the feet! I mean almost you can't move tight! Nobody on my list made a 5! But for their joints desired a 5! There is one thing unlike HT...the shoulders. Here the shoulder don't move inward like the HT, but other then that...THERE ARE EXACTLY LIKE HT! There are two criticism I have. One is with their long neck posts. The guy is like a giraffe! I'm going to have to figure how to shorten it. The other is the hand pegs. They are a #$@^%$ hard to pull out! I mean dagnabit. I believe in stiff joints, but they have taken it to the extreme! They used good plastic, so if you want HT quality but don't have money to buy HT, then ACI is for you! The HS/Neck Post fits bbi/HT bodies. The hand pegs should fit the fat stubby ones, or HT hand pegs.
Art Figure (ART) Body 3.5/3/4/1/2: The body is solidly made with fairly stiff joints. Although the posing is average the main problem is the right shoulder where the arms are attached. It is very weak here. I am now fixing 2 of them. I would be careful with the arms where it meets the shoulder.
NOTE: Now I know why...To tell the difference between the left and right arms for the workers, they made the left thicker and the right thinner. Stupid!!! That just made the right weaker! I am fixing 2 more bodies for a total of 4 bodies! Really stupid!!!
Blue Box International (bbi) Nude Body G1 2~4/3.5/3.5/3/4: Now, I got the one where the face changes. No, not the head changes, FACE CHANGES! You insert a plastic key in the back of his head and his mouth opens and eyebrows change positions. Very cool!!! I should say "slight changes in his face." But none the less, it's very cool! The joints on this are pretty stiff, but limited shoulder movements. I would definitely buy another one if I could get my hands on one! The HS/Neck Post fits bbi/HT bodies. The hand pegs should fit the long narrow type, or bbi hand pegs.
bbi Nude Body G3/3.5 Body 1~3/4/3.5/5/4: Let's just say that they have made steady improvements over the years, culminating in the G3.5! Their G1 have loose joints and their poseability is that of the older DML body - LIMITED. But what can I say about the G3.5? This set the standard for the whole industry and as far as head sculpts go! They made the standard for the sockets which hold the head/neck in place. Now, you don't have to worry about whether your HT HS is going to fit an ACE MK1 body! The joints are fairly stiff and the wrist pegs don't break like other makers (shhhh-HT). I would try and stay away from the clones just because their joints are way to loose. The bbi ones have much, much more tighter joints! Overall, I would have to rate this as one of the best bodies I have come across. The HS/Neck Post fits bbi/HT bodies. The hand pegs should fit the long narrow type, or bbi hand pegs.
Barrack Sergeant (BS) Revolution - Bravo 1~2/4/3/3/4: I feel it is a bit loose, but others have said that their joints were just fine. Like 50% bad joints and 50% good joints. I don't know if I got a bad batch. Whatever the case maybe, they need to manufacture these on a consistent level. Not too slim and not too bulky, enough to fit several layers of clothing on the body! Overall the body is very well made. The movements on his shoulder and neck are impressive. Heck, let's just say I would recommend these and it's on my best body list. I have one. The HS/Neck Post fits bbi/HT bodies. The hand pegs should fit the long narrow type, or bbi hand pegs.
CM Toys Muscle Body HJ (CMT) Caucasian 3/Black 3/3.5/3.5/3/3
My first impression were these bodies look pretty good. I said, "pretty good." They put the rubber skin on the plastic body which means if you extend the arms in an upward position the rubber skin becomes congealed. The joints are fair stiff and they give you a host of hands to choose from as well as an extra hand pegs. They also give you what looks tobe 2 extra neck pegs to be able to fit HT heads. All and all, you may like the body, I don't. Thank God I didn't buy one, instead I'm lucky to have a friend in the 1/6 figure business! The hand pages are the short ones and they should fit HT.
Crazy Dummy Bodies (CDM) 3.5/4.5/4/5/4.5: Wow! I was very impressed with Crazy Dummy first attempt at a body. First of all I like the stiffness. Comparable with HT, especially around the torso area, I think it's better than HT. Where else do I think its better than HT? The shoulder area. I think that it has better rotation. Now a lot of companies have started to copy the HT body and add a little twist of their own and here is no different. The elbow pegs come straight from HT, but I can't seem to take the knee apart. That is good I guess of all the horror stories I have heard about HT but have never experience myself, and I own +30 HT bodies. The wrist pegs are the same as HT for the hands but for the arms there a little longer and not with the ridges. I like them. The only criticism I would make is on their neck. Although it is suppose to fit bbi, it's loose and on the HT short neck post, but the HT long neck post, it keeps popping out. In conclusion, I would have to say is that I love these bodies, but damn sure hard to get on-line! The HS/Neck Post fits bbi/HT bodies. The hand pegs should fit the long narrow type, or bbi hand pegs.
DAM Body3/2.5/3/3/3: It is another ACE body. Where the shoulder meets the arm, it is kind of loose, but other than that it is fairly stiff. I think all the manufacturers make only 5 or 6 bodies. I don't mind when they use another companies body, but when they make it their own...I kind of frown upon that. Just MO.
Dragon in Dreams (DiD) Gen 1 & 2 Body 1~2/3/3/3/3.5: Like that of TS T-1F. It's a little tighter on the joints. They are a little shorter than the other figures, but adds more variety to my figures. A really big plus! Limited shoulder and torso movements are good. Both Gen 1 & 2 are almost identical. The main difference are in the hands. 1st Gen hands were molded, but could move. In other words, the index finger and the rest the fingers, with the exception of the thumb can move to grip guns or to hold a mug. Cool you say? But they can't hold anything! The joints need to be tighter that's why I guess they went to the bendy type in the second generation. The bendy fingers are longer than most, I guess that's a good thing because his hands holds all weapons! Overall, I would say that it's a good body and I like it. The HS/Neck Post fits bbi/HT bodies. The hand pegs should fit the long narrow type, or bbi hand pegs.
1st Generation Right Hand:
2nd Generation Right Hand:
DiD Newer Body2~3/3/4/3/3.5: The newer bodies have more rotation in the shoulder and it is stiffer than the older bodies. Other than that there is not much to say about the newer bodies except that it is a huge improvement over their older bodies, but I have to say that it is in the maybe buy category. I will always buy their weapons!
Dragon Models Limited (DML) Neo Body 2~3.5/3.5/3.5/3/3.5: Cheap and inexpensive! Depends on the figures, some have tight joints, and some have loose joints. Earlier versions I would try and stay away, just because they are way too loose. If you don't have the money to buy a BS, ACE, HT, then get the bbi. If you don't have money to even buy this, than get DML or DiD. I don't have an Adam so I can't compare. The HS can be made to fit bbi neck posts. The neck posts don't fit bbi's, but with a drill, anything is possible! I don't think the hand pegs can be removed on these. If you can remove these, I don't think they fit any other manufacturers.
DML Neo Muscle Body 2/2.5/4/5/3.5: I would highly recommend the Walt and Fernando bodies (Neo Muscle)! Although they are less poseable, due to them being a muscle figure, I find that the joints are tighter than all other DML figures. Other than that, it's just like that of the DML Neo Bodies. The HS/Neck Post don't fit bbi/HT bodies. The hand pegs can't be removed on these.
Enterbay (EB) BL 2.5 Body 4/3/4.5/5/4.5: Same as the TT38 Body but he is very tanned. [color=Red]: I bought this mainly to see how this body compared to other military bodies. They used high grade plastic on this, I mean HIGH GRADE! Man, this body is solid! A lot more heavier than most military bodies and has some stiff joints! Making a "clicking noise" on its knees, torso, and I love this, lateral movement of the ankles. Now, the drawbacks are: no shoulder, neck, and wrist pegs movements. I can do with the no shoulder and neck movements. What I dislike most are the wrist pegs, or should I call them arm pegs. They almost go half way up the arm before you add the pegs! Now the 2.5 has an angled neck whereas the 3.0 does not. I think that's the only difference between to two. Despite the dislikes, I have to be honest and say that I really like this body, because of its solidness and stiff joints. The HS don't fit any body, they should follow bbi, but they will learn, like HT. No other manufacturer makes these kinds of hand/arm pegs.
EB BL 3.0 Body 4/3/4.5/5/4.5: Same as the TT38 Body but he is very tanned. BL 2.5 has an angled neck whereas the BL 3.0 does not have an angled neck. Everything else is the same. No other manufacturer makes these kinds of hand/arm pegs.
EB BL 3.5 Body 4/3/4.8/5/4.5: Man. I've said it before, these are the toughest bodies around. They weigh a ton. I mean solid! I already like it, but then again, I love all the EB bodies, although I don't like wrist pegs (read 2.5). They are not really pose-able like HTs, but then again they don't need to be. Now the clicking noise on the ankles are gone! But they have added clicking noise to their knees, torso, and elbow. Well, it more like a clacking noise, not the crisp clicking noise that the 2.5 and 3.0 had. This creates more stiffness in the joints, which we all love. Since these were made for Bruce Lee and we all know that the man wasn't that tall, they are short, I mean short! I like variety in my figures. Now the price tag on these babies are not cheap! Between $40~65 shipped. Yes, that price is for ONE BODY! But it's is well worth it. NOTE: HS is fabulous. The only thing he can do is look down, no side to side movements or looking upwards. The one thing about this that is really cool is that the eyeballs move, as with most of EBs. No other manufacturer makes these kinds of hand/arm pegs.
EB RM-4 Body 1/3.5/4.5/5/4: First of all I would like to apologized to everyone here. It is Matt Damon! The headsculpt is better once you get in hand. I would agree with zebraten (Page 5, reply 123). This figure is TALL! I didn't realized he was that tall, but I got one more body along with this. A EB Bruce Lee. The RM-4 is about a head taller than EB Bruce Lee! And I just measure him to an ACE MK-1 and he's still taller! The reviews of the body can be read here. Just punch in RM-4 body on the search. I would agree with most of the statements said here. The HS/Neck Post fits bbi/HT bodies. I don't think these pegs can be pulled apart. The hand pegs can't be pulled off.
EB RM-4.2 Body 3/3.5/4.5/5/4: This really looks like Che Rivera! Other than that, it is exactly like the RM-4 body except this figure might be smaller. The hand pegs can't be pulled off.
EB RM-5 Body 1/3/4.5/3/3.5: I don't like this body because of one thing...the stomach. The tummy area is not stiff at all. Although I might have gotten a bad batch, but other than that, it is pretty stiff. This figure is much more muscular than the previous 4 & 4.2. I don't really have that much to say about the figure. All that is different is the upper portion, the lower portion is that of the 4 & 4.2. The hand pegs can't be pulled off.
EB RM-X Body 3.5/4/4.5/3/3.5: I don't know if I like this body for the price...No, definitely not worth $80-90, even with shoes & socks. Let's talk about the upper body, because the lower body is the same as the RM4-5. Of all the seamless bodies, I would have to say that I like this the best. Of course where the arm meets the shoulder, it is not seamless. That is good, because of what happened to the CM muscle body. Elbow moves quite well, but the shoulders...that is where all muscle bodies have problems. The body in general is very stiff, but one cool thing about this is that I think the neck moves 30 degrees in either direction. That is pretty cool, but not worth $90 asking price...
G.I. Joe Body 1.5/2.5/2/1/2: It was the first bodies out there for the mass market. In fact, it was the ONLY BODY OUT THERE! I forgot that I had one, that is why I didn't list this (LOL)! Now on to my review. First, the body articulation is very limited and the feet are WAY TOO BIG to fit most of the shoes made today. In fact, they don't fit all of the "real-like lace up" Danner boots! The joints are very loose, although not as loose as the TS T1, but close, and Kung-Fu grips on the hands don't grip so well. So, why did I trade for this piece of sh-t? Because of my childhood! It's like every girl had a Barbie and every boy had a GI Joe. If you didn't have a GI Joe, YOU WEREN'T HUMAN! So what if the feet are big, body articulation very limited, joints are very loose, and the Kung-Fu grip doesn't grip...It was worth the trade I made for a piece of nostalgia... The HS/Neck Post don't fit bbi/HT bodies. The hand pegs should fit the long narrow type, or bbi hand pegs.
HT Generic Type Body 2/4/4/5/4: To tell you the truth...these are really impressive. Joints are tight, movement are like HT...but there are some bad points and good points on these. First the good point. Wow! The shoulder is very impressive! Better shoulder movements than HTs, but...I know there are always "but"...there is a piece in the shoulder which protrudes outward when put into an awkward pose and the feet doesn't have joints in them. These are the only two faults that I can find with these. If you need tons of more than decent bodies for a good price, than these are for you. You can't go wrong with these! The feet don't fit HTs. Although the foot part fits HT pegs, the upper part of the peg is smaller, not the same as HTs. Hand pegs should fit HTs.
HT True Type (TT) 34 Body 1~2/3/3/1/2.5: Although not as good as a TT38, they are still pretty good. The bendy hands really can't hold weapons, but that is with all HT bodies. I guess that is why they have abandon the bendy hands with molded hands on all the newer models. Good move on their part, because their bendy hands were sh-t. Joints on these are fair. The feet doesn't have joints to bend like on their newer bodies. I wouldn't get one of these bodies. Why? Why should I when I can get a TT38. The HS/Neck Post fits bbi/HT bodies. The hand pegs should fit the long narrow type, or bbi hand pegs.
HT True Type 38 (Older Ver.) by cdn rhino
I took a look at my Polar Mountain Striker and the new TTM-14. The Striker was on the early True Type 38 body, so the neck will work straight across. The biggest difference will be the wrist and ankle joints. Those are different. Paint apps would be a huge difference too. The HS/Neck Post fits bbi/HT bodies.
HT TT 38 Bronze Body 4.5/4.5/4.5/5/4.5: Same as the TT38 Body but he is very tanned. Boy, have they made drastic changes from their first TT bodies! The TT bodies that are now being built are rigid & structurally sound. I have yet to break the knees, as Paul mentioned, and I've taken a lot of knees apart. I don't know, but IMO, the knees are solid. Maybe you got a defective one Paul? My only complaint would be their wrist pegs. Very weak, but fortunately I've broken only one and I own over 20 TTs! The other complaint I have are the bendy hands. They don't hold the weapons! I guess that's why they have abandoned the bendy hands on the newer TT. The newer HS/Neck Post fits bbi bodies. Although not perfect, my favorite body so far, from their stiff joints to their new neck post! This HS looks like Beckham. The HS/Neck Post fits bbi/HT bodies. The hand pegs should fit the fat stubby ones, or HT hand pegs.
HT TT 38 Narrow Shoulders (TTM-08/14 (38NS) 2/4.5/4.5/5/4.5: Same as the HT TT38 except with slightly narrow shoulders. TTM-08 looks like James McAvoy and Taylor Kitsch (TTM-14).(?) The HS/Neck Post fits bbi/HT bodies. The hand pegs should fit the fat stubby ones, or HT hand pegs.
HT TT 38 Slim (TTM-09/10 (38S) Black-3/Caucasian-2/4.5/4.5/5/4.5: It's almost the same as the HT TT38 and I really like the shoulder movements here. With these bodies you can fit about two more layers of clothing on the figure than the TT38. The hand pegs have changed a little. Maybe now they won't break! And they make a 'clicking' noise when you move them. The HS looks like Prince Henry (TTM-09) and Terrance Howard (TTM-10). Look, I love the HT TT38 & TT38S, as evidenced by me owning over 20-TT38, 2-TT38NS and 1-TT38S. So what? Do you want to make something of it! The HS/Neck Post fits bbi/HT bodies. The hand pegs should fit the fat stubby ones, or HT hand pegs.
HT TT 38 Advance Version (TTM-15/16 (38AV) 3/4.5/5/5/5 NEW: I think the joints are stiffer than all other TT on this body, which is a definite plus in my book. And what do I love about this TT38AV? They give you extra hand pegs! So now you get 4 instead of a pair. The thigh adders...I don't know what to think of these. I guess it's good if your looking for a football or soccer player, but be warned. They add much thickness to the figure, so some of the clothes maybe a tight fit. Other than that, it's almost like the TT38 bodies. It has a taller neck post and little stuff like this, but similar to the TT 38. Oh, I forgot. I think they used better plastic on these figures because they seem to be heavier than all of the other previous models. The HS on the black figure is most definitely Obama (TTM-16)! Wow, a real likeness. On the other figure, I think it is Dominic Purcell (TTM-15)? But they are both very well done. I love, I mean I love these bodies! I think I'm going to buy more! The HS/Neck Post fits bbi/HT bodies. The hand pegs should fit the fat stubby ones, or HT hand pegs.
HT Muscle Body 1st & 2nd Generation 4/2/4.5/1/3.5: Now for the muscle body review. Not good. Upper body has limited everything, limited arm, shoulder, elbow movements and no torso movement. And I do mean VERY LIMITED. It was a bit-h trying to pull off the T-shirt on my SDU figure, not only because of the limited shoulder movements but it's made of rubber! Like pulling teeth! Only get this figure if you are willing to live with with the limits of this figure or you really need a muscle figure. Their not bad at all, it's just that I don't like "limited everything." I sold mine on eBay a long time ago. Now, I got the second generation ones, the first generation ones HT built has a lot of problems, from their torn rubber to the socket coming out from their joints. The HS/Neck Post don't fit bbi/HT bodies. The hand pegs should fit the fat stubby ones, or HT hand pegs.
HT TTM19 Muscular Body Version 3/3.5/4.5/4/4.5: Wow! Talk about head movement. I think this figure's head movements closely replicates a real human head! He is a muscle figure, therefore he is less posable. The old TT bodies can be articulated into 38 positions, this one say 30, now whether he does or doesn't I don't know, but I think his head is accounting for a lot of the 30. One thing I have to say are their hands are much more user friendly. If you have ever tried to put gloves on the older HT hands, IT WAS A B*TCH! Not anymore! I got my gloves on in less than 3 minutes! I don't have any negatives to say about the body. Maybe that the skin tone of the figure is nice, but it has a matte finish on it. It's like getting out of the tub in winter and not putting lotion on the body. Very dry skin. Other than that, I would have to say I like it, not love it, just like it! The hand pegs should fit the fat stubby ones, or HT hand pegs.
HT TTM 20 Advanced Muscular Body 4/3.5/4/5/4: These are much more muscular than than the previous TTM 19. In fact, I think they would have problems fitting on most clothes...I mean they are a lot BIGGER! From his chest to the bicepts, although not overly muscular, to his thighs. You don't need the thigh covers for this one. The body weighs a ton! but I like it. The only thing I would critizce about the figure is that it does not have the neck joint. In other words, it has the long neck post that is on the body, unlike the TTM 22 which you can take off.
HT TTM 22 Slim Body3/4/4/5/4: I really like this body! It is a lot smaller than the TTM 20...a lot! Weight is like a feather compared with the TTM 20. I like that it has a removable neck joint for heads with attached neck joints. Good posing, the body is solidly made.
Ignite Body 1/1.5/1/1/1: I love the gear that it comes with (all metal and wood!), but unfortunately the body is seriously lacking. Where the leg meets the hip, it is very weak. In other words they can't hold up the metal gear (chest armor) on their chest. They slouch over! Over and over! And their upper bodies there are some quality issues, because some of the bodies had stiffer elbow than others. These are not good bodies, I would say it is on par with TS T1s. I would buy the gear on the Ignite figures, ditch the bodies and swap them out for a bbi 3.0 or better. I don't know about if these HS will fit bbi's. I don't know about their hand pegs.
In The Past Toys (ITPT) Body 1/2/1.5/1/1.5: I bought it mainly for the Chuck Norris HS. It's a dead ringer for the guy! If you want a C. Norris HS, buy ITPT! Now as for the body...well, let's just put it on my least favorite list, meaning it way too loose for my taste and the articulation...same the the first DML or bbi bodies...VERY BAD. I don't know about if these HS will fit bbi's. The hand pegs should fit the long narrow type, or bbi hand pegs.
King's Toys (KT) Body ?/?/?/?/?: by Oppl
Playhouse (PH) Hand Pegs: Why haven't I learned! Never force, never force... The hands are part of the pegs! Which means you can't pull them out like many other companies. I broke mine after I tried to force it out. The hand pegs should fit the long narrow type, or bbi hand pegs.
PH VBSS Body 3.5/3/3.5/3/3.5: These are very similar to the TTL at first I thought to myself, but on closer examination, they weren't. I really like the TTL bodies, but these...are just average. The elbow and neck joints are the problem. They are too loose I am afraid. Although the arms could hold plastic guns, I would seriously doubt if they could hold metal weapons such as the ones made by DiD. The neck is also a problem. To loose for me, and you know how tight I lik'em!
Sea International Body 3/2.5/2/1/2: This body is okay, but too loose IMO, but not as loose as the T1. I thought that I would like the stomach area because there is a joint there which means he could bend over a little more. Well...he bends over A LITTLE! Hardly worth getting for this reason. That is all I have to say about this. Hand pegs cannot be pulled out.
Sideshow Toys Body (Older) ?/2.5/4/3/3: I saw and played with my friend's sideshow body. First off, I notice that it has much more muscle than the other bodies. The chest is enormous! There was something else I noticed. The body/joints was stiff! They make a 'clicking' in the arms/shoulders when you move it - cool. I really liked this body but the articulation lacks on this body. It's a good body if your going for the muscle look. I don't know about their hand pegs.
Soldier Story S2 Body 2~3/4.5/4/5/4.5: First the joints are pretty tight! Knees, elbows, hip sockets,...all except the shoulders. That is due to the fact that they tried to make it as realistic as possible. The shoulders actually goes into the body! Pretty cool! And the bendy hands actually holds weapons! Now for the bad news. I don't know if I like the posterior (lower portion of the body). The skeletal portion of the body is still made of plastic but the outer shell is made of rubber. Now for the head/neck joint. I accidentally popped off the head. When I tried putting the head back on I couldn't pop it in to place! You have to take out the pin which holds the head in and then take out that pin insert it into the head and then the socket which goes on the body. I did this all with pliers, three times! The head pops off too easily! Bad design IMO. All 'n all, I would have to give the S2 body thumbs up! The HS does fit other makers, but the body/neck post does accept most manufacturer. The HS/Neck Post fits bbi/HT bodies. The hand pegs should fit the long narrow type, or bbi hand pegs.
NOTE: Head is still popping off and now the ankle pegs...aren't holding...I would have to say I won't be getting anymore.
The Ultimate Soldier (TUS) Body 1-3.5/2/2/1/2.5: These are dirt cheap. If you want your soldier to take the punishment that a boy would do, then these are the bodies for you, but if you want to put expensive gear and things on this and pose it, this isn't for you. Made inexpensively for children these bodies are for "try outs." Try an outfit on and then take it off. Put gear on and then take it off. You get the drift. Whatever you use these bodies for, they are tough! The HS/Neck Post don't fit bbi/HT bodies. I don't know about their hand pegs.
Toy City (TTL) T 2.0 Body Black 3/Caucasian 1/Hispanic 3/3.5/4/5/4: First of all, I like that the joints are stiff! Always a plus in my book. They are much slimmer and smaller than most of the military bodies, which means you can pile on the clothing on him. A big plus is that although his hand are molded (plastic/rubber), his hands can be separated! The shooting hand, the pinky is stuck to the ring finger, but that can be easily fix with an X-acto. Why is this a big plus you may ask? THEY CAN WEAR GLOVES! Although you do get movement in the shoulders, it's limited, not a biggie, at least he has some shoulder movement. The point is made by a member here and I tend to agree with him to a point. It's made of cheap plastic. Now I slightly twisted his joint where it meets his forearm and the forearm came apart. Then I noticed that the joint holding the forearm was not glued. I think this was intentional, but not the forearm coming loose. Easily fixed, just put superglue. But they could have used better plastic. Buy one, you won't be disappointed. Although meant to fit any HS, some work has to be done, but if you pop the neck post off, it will fit bbi. The HS/Neck Post fits bbi/HT bodies. The hand pegs should fit the long narrow type, or bbi hand pegs.
TTL T 3.0 Body Black 3/Caucasian 1/Hispanic 3/3.5/4/5/4: This is fast becoming my favorite body! All the joints are stiff, and I mean stiff! The joints are as stiff or stiffer than HT TT bodies. Again, this is a little bit slimmer than the rest of the bodies in comparison. The body has movements like that of HT bodies except the shoulder movements. They have a little piece of plastic which goes over the top of the shoulders. I guess this is good, but it restricts the movements of the shoulder blades. The feet and hands are the same as HT and can be interchangeable. Now here is the great thing about these bodies. The head pegs! The head pegs comes with a bbi or HT pegs! This is great!!! The bad side of this neck post, you can only fit "the head" and not "the partial neck and head." You can choose this body if HT is too much. They run about $13~20 per body (hands, feet, and two head pegs included). This is a great body and you won't be disappointed. The HS/Neck Post fits bbi/HT bodies. The hand pegs should fit the long narrow type, or bbi hand pegs.
Toy Soldier T-1/F Body Jeff Gregorec 2/Howard Max Mullen 4/1.5/1/1/1: A vast improvement from their first T-1 (SSGT Gregorec) where all the joints were too loose! And when I mean loose, I MEAN LOOOOSSSEE!!! He can't even stand up by himself without some help! At least now the T-1F have tightened their joints (Mullen). Still a little loose for my taste. And their "gloved bendy hands" (T-1) don't "BEND!" They are so stiff and short (stubby fingers) that they don't bend! On the T-1F I have the bendy hands, with gloves on, is that the hand/wrist joints...how shall I put this...Oh yes! CRAP!!! I mean the hand/wrist pegs keep falling off at the joints!!! Very bad design! My other complaint about them is, "WHY ARE THEIR HEADS SO SMALL?" Still they are the least favorite. I have one T1 and one T1F, Gregoric and Mullen. That's all I'm going to buy! The HS/Neck Post fits bbi/HT bodies. Don't buy this unless you plan to spend a lot of time modifying this body. I had to add super glue to all the joints to stiffen it up (T-1F)! The hand pegs should fit the long narrow type, or bbi hand pegs.
Triad Omega Body Asian 2/Black 4.5/Caucasian 3.5/3.5/4/1/4.5: First of all, the joints are fairly stiff, a plus. No shoulder and limited neck movements, two negatives. Third, I bought this thinking I was going to get Robert de Niro from the movie Taxi. I was sadly mistaken by the HS, it doesn't look anything like de Niro! And lastly, the foot does not have movement in the front, unlike HT, bbi, DiD or TC. I read in nerdpride's column it has 35 points of articulation. Your lucky if you get half that! And I don't know what's nerdpride is talking about, because I can't interchange the hands/wrist. But it comes with some kicka-s briefs! But sadly, I would have to put this on my "Not to buy more list." In fact, I would not buy any of Triad bodies due to the reviews I have read. Just MO. HS does fit bbi but not the neck post. The neck post is fixed. The hand pegs should fit the long narrow type, or bbi hand pegs.
ZC World (ZCWO) AB01 Articulate Body 4/4/4/5/4: These are very similar to the Hot Toys TTM bodies. They are much shorter than other figures, but...the accessories are outrageous!!! Not only does it come with an extra pair of ankle pegs to give your body some extra height, but it comes with 4, count'em 4 neck pegs. One that fits bbi, another HT, and another I don't know, plus it has its own which fits its own head. Man...talk about coming fully loaded! I love this! The head sculpt is supposed to be Terrence Howard, but I don't think so...It a thin body so it can take layers of clothes. Price on these is not too bad at under $50.
ZCWO AB02 Articulate Body 2.5/4/4/5/4: Exactly the same as the AB01 bodies only this time it is Caucasian.
12" Figure Body Types by Jedi_Eeth_Koth
12" Figure Body Types
DML Neo Adam, ACE MK1, HT TT, SS S2, BBI G3.5, Obitsu Slim, BBI G2 by dangercorpse
Sixth scale nudes | Flickr - Photo Sharing!
Flickriver: Photoset '1/6 Nudes' by dangercorpse
HT TT Bodies by Crusader1xxx posted this/Evilalive took these pics
On page 1 of this post, insert or reply 26.
Body heights by Krechet
What are some shorter modern bodies? by unclechopchop
A Comparison of Body Chest and Shoulders Dimensions by Michigan Dawg
Kaustic Plastik KP02 Heroik Muscle Body Photo Review by edwick
12\" Figure Body Types by 187_Maul
12" Figure Body Types
1/6 scale Obitsu body size chart
1/6 scale Obitsu body size chart
1/6 (Sixth Scale) Bodies for Bashing, Posted: Sunday, July 15, 2007 by Shaun
Fortress of Testicular Fortitude: 1/6 (Sixth Scale) Bodies for Bashing
Heads to fit onto the Dragon Neo 2 bodies by Johkaz
On page 1 of this post, insert or reply 18.
Gary's Head & Neck Adapters Page
Hot Toys TTM19 & ACI Muscle (Andrew) Figures by ontheroad
On page 1 of this post, insert or reply 16.
Hot Toys TTM18 Narrow Shoulder Body Quick Review by Valken
EB RM-4 Body by zebraten In this thread, Page 1, reply 14.
The Enterbay RM-4 by Rogerbee (Pic heavy!) by rogerbee
ZCWO Body is a clone of bbi G3 by rogerbee
Comparative review of other bodies by cdn rhino
This page, insert or reply 3.
Various HT Bodies by nikoniko
On page 1 of this post, insert or reply 4.
Skin Color by cdn rhino
On page 1 of this post, insert or reply 5.
Playhouse & Sideshow Pro by UrbanSamurai (Aka: Spencer) on page 1 of this post, insert or reply 6
And you can type in "1/6 Body Reviews" on Youtube.com (Mostly review of female bodies, which I don't do)
YouTube - 1/6 body reviews
But see this one:YouTube - 1:6 Nude Figure comparision Hot Toys/BBI/Barrac/Sideshow
Sideshow Collectibles 12 inch Figure Body Guide by Sideshow
Sideshow Collectibles Sideshow Collectibles 12 inch Figure Body Guide
1/6 scale Obitsu body size chart by Parabox
1/6 scale Obitsu body size chart
New from TBLeague：Version II of the 1/6 female body by ZIPCOOLO
Review: New TTF body review. Applies to Jill and Black Widow body. by BeastX
I've Got Her! Eva In Hand Pics/First Impressions/Mini Review by Kinster
Hot Toys TTM-15 & TTM-16 Advanced Truetype Nude Review by doly
TTL body activity test by BBICN007
Hot Toys TrueType Body Comparison by Captain Toy
Hot Toys TrueType sixth scale action figure body comparison !
1/6 (Sixth Scale) Bodies for Bashing by Shaun Wong
Fortress of Testicular Fortitude: 1/6 (Sixth Scale) Bodies for Bashing
Hot Toys True Type Advanced Version African American by Shaun Wong
Fortress of Testicular Fortitude: Hot Toys True Type Advanced Version African American
Dr. Figures vs BBI DML HT Armoury bodies by cdn rhino
Dr. Figures vs BBI DML HT Armoury bodies NEW PICS ADDED!! - OSW: One Sixth Warrior Forum
HT bodies comparison by lukazou
HT bodies comparison - OSW: One Sixth Warrior Forum
Soldier Story S1 Body You should really read this! Thank God I didn't buy one! Thread started by goaltendah1.
Soldier Story figure durability - OSW: One Sixth Warrior Forum
Some comparisons of nude 1/6 by dedguy
Some comparisons of nude 1/6 - OSW: One Sixth Warrior Forum
bbi G1 & G3.5/Dragon Adam/Volks Neo/Armoury/Early Hot Toys/Dr.Figures Comparison. Thanks Mike!
Dr. Figures vs BBI DML HT Armoury bodies NEW PICS ADDED!! - OSW: One Sixth Warrior Forum
Hot Toys and Sideshow Bodies: A Comparative Review by justinluck
Hot Toys and Sideshow Bodies: A Comparative Review - OSW: One Sixth Warrior Forum
12" Bodies Comparative Database by limtoy
12" bodies comparative database - OSW: One Sixth Warrior Forum
Toy Fair 2008: New 12-inch Figure Bodies revealed! by Sideshow
Sideshow Collectibles Blog Archive Toy Fair 2008: New 12-inch Figure Bodies revealed!
Alpha body quick review (Triad) by marco123
Triad Toys Forum • View topic - Alpha body quick review
Triad Omega VS HT TT by nerdpride
Crazychildren: TRIAD vs HOT TOYS
Otaku or EVE ZC by The Great Shaggy (Second Post)
Otaku or EVE Zc Bodies - OSW: One Sixth Warrior Forum
Dragon New Muscle Body and body comparison by James van Spronsen
Dragon New Muscle Body and body comparision - OSW: One Sixth Warrior Forum
Hot toys Slim body articulation review (photo updated on 16th Jul) by evilalive
Hot toys Slim body articulation review (photo updated on 16th Jul) - OSW: One Sixth Warrior Forum
Most breakable/Least breakable 1/6 bodies by hotmitts
If you have any bodies to share, please feel free to post what you want to say. Again, this is my opinion and nobody else. And a special thanks go out to cdn_rhino for his in-numerous insight into the bodies (Man! He's got a sh-tload of bodies!).