General News Hot Toys - MMS186 Avengers 1:6 HULK

JeffSaylor · #1 (**permalink**) 08-10-2012, 08:25

**Prototype shown is not final, pending licensor approval

Hot Toys present the latest addition to their Avengers 1:6th scale lineup, the fan-anticipated HULK. Not many accessories with this fella, but collectors get one massive figure (16.5" tall) featuring a newly developed head sculpt with rolling eyeballs and specially sculpted muscular body.

Hot Toys - MMS186 - The Avengers: 1/6th scale Hulk Limited Edition Collectible Figurine Specification:

- Authentic and detailed fully realized likeness of Hulk in The Avengers movie
- Approximately 42 cm / 16.5 inches tall
- One (1) newly developed head sculpt with separate rolling eyeballs

- Movie-accurate facial expression featuring his angered gesture with detailed wrinkles and skin texture
- Giant green-skinned muscular body featuring detailed skin texture and tendons, with over 20 points of articulations with built-in joints in neck and arms which allow flexible movement
- Two (2) pairs of interchangeable palms including:
. One (1) pair of relaxed palms
. One (1) pair of forceful fists

Costume:

- One (1) pair of ragged grey shorts

Artists:

- Head Sculpted by Kim Hyun
- Head Painted by JC.HONG
- Head Art Directed by Kojun
- Body Sculpted & Painted by Joseph Tsang

Release Date: Q1, 2013

CLICK HERE FOR MORE PHOTOS

dunk_guy01 · #2 (**permalink**) 08-10-2012, 10:15

matta8561 · #3 (**permalink**) 08-10-2012, 11:22

I hope the ams arnt so muscular that they cant be lowered closer to his sides

elar · #4 (**permalink**) 08-10-2012, 11:53

Why he need moving eyes, when you can't see them?! And he will not have stand?

Eterniandreams · #5 (**permalink**) 08-10-2012, 14:12

Sweet!
They could reuse that body for Grundy and Ram Man

glenning · #6 (**permalink**) 08-10-2012, 14:25

Awesome, now I can finally start planning my Warhammer 40k Ork bash.....

JeffSaylor · #7 (**permalink**) 08-10-2012, 16:25

Hulk just went up for pre-order at BigBadToyStore.com - $274.99 is the going rate for this massive fig

Antihero · #8 (**permalink**) 08-11-2012, 00:32

It lacks accessories! It should come with a Mark Ruffalo head so it'll look funny when attached on the Hulk body or a hand for gripping Loki's feet.

vailus · #9 (**permalink**) 08-11-2012, 09:17

I was planning to get the entire Avengers set, but $300 for something with no accessories is just too much. I get that they had to make a whole new body, but Jake Sully was the same, and he at least came with a gun and a light up stand. I was at least hoping for multiple heads. "Angry Hulk," "Don't know what's going on Hulk," "Sorry I just stepped on your puppy Hulk," something. Heck even add $50 more to it and shove a generic body with a Mark Ruffalo head in and sell it as a Banner/Hulk set.

Beckley · #10 (**permalink**) 08-11-2012, 13:21

Amazing

callmedude · #11 (**permalink**) 08-11-2012, 15:31

My bet is that there is a DX version coming. They've invested in the mold for a unique figue - best way to make use of it? DX version, with a Bruce Banner head/body (easy accessories), and a neutral face sculpt for Hulk. (I just punched Thor face? Smiley pre-hulksmash face?)

Maybe even a second set of hands for Demigod flailing? XD

Either way, still getting one. Must complete Avengers lineup! At least big bad has it for $274, $300 with no exclusive/accessories is definitely pushing it for me.

MelDesigner · #12 (**permalink**) 08-11-2012, 22:52

Most likely a DX Hulk/Banner Ruffalo set will be in the future.
I wonder if any other character can utilize the Hulk body?

humanbeingill · #13 (**permalink**) 08-12-2012, 09:11

A DX version is VERY likely. Potential accessories SHOULD include Banner figure, 2nd headsculpt of Hulk, and hands for holding stuff for SMASHING things like "Puny Gods".. One can hope, that's what's keeping me from getting 3 pieces.

Wait! 16.5" x 6= 99" •/• 12"= 8.25ft..... Hulk is only 8ft 3 inches? He looks taller on TV...

LizardKing1968 · #14 (**permalink**) 08-12-2012, 16:55

Quote:

Originally Posted by humanbeingill

A DX version is VERY likely. Potential accessories SHOULD include Banner figure, 2nd headsculpt of Hulk, and hands for holding stuff for SMASHING things like "Puny Gods".. One can hope, that's what's keeping me from getting 3 pieces.

Wait! 16.5" x 6= 99" •/• 12"= 8.25ft..... Hulk is only 8ft 3 inches? He looks taller on TV...

he does not have a set height per say bro (marvel wiki starts at 7-8 ft.) the angrier he gets the bigger and taller he becomes. that's how it is in the comics..for some reason i didn't care a whole lot for the movie although ruffolo was good as dr. banner. easy pass for me...it has become an expensive hobby for sure!

peace out
miguel

Joker's Wild · #15 (**permalink**) 08-28-2012, 01:13

I don't know what's with the complaints on this awesome figure? He is almost 17 inches tall. That is just under what normal quarter scale figures are at. You will not understand how massive this figure and his box will be until you have it in hand. As for a DX version... I highly doubt it no reason for it, but I do think a release of a Mark ruffalo, Banner figure would be in the cards. Makes for a perfect 2013 toy fair exclusive.

humanbeingill · #16 (**permalink**) 08-29-2012, 22:16

A Banner exclusive is very likely. As for "over doing it" HOT TOYS is comfortably cranking out licenced titles with many over done figures, EXAMPLE my 11 Ironman/Warmachine figures. By this time next year it'll be 13 with IRON MONGER and MARK VII, and whatever HT decides they will cash in on. Not complaining, I'm just saying... Last Stand Wolverine was a total surprise, I found it by mistake 2 weeks ago and thought it was a custom MEDICOM so theres no telling what the mad scientists at Hot Toys has up their sleeves. HULK made the movie and HT probably knows it too so I'm sure there will be a DX HULK, BANNER and possibly an "EVIL" Hawkeye figure....... well maybe not the HAWKEYE, but you get where I'm going LOL.

blojos · #17 (**permalink**) 10-07-2012, 16:49

I can't wait for this guy! He's gonna be sick!

lastintheirclass · #18 (**permalink**) 10-07-2012, 17:07

ouch on the price tag ~ i feel for all the Avengers completists!

would be nice to see him standing next to the rest of the group, just to see the scale.

: D

LavaDroid · #19 (**permalink**) 10-07-2012, 18:13

Once I complete the Avengers, I will be done for my massive HT purchase.

But seeing the pictures of the DX Batman & Bespin Luke production figures makes me scared for what we are going to get when the rest of the Avengers come out.

By the time we get Hulk, he might look like Gumby !

Venom_113 · #20 (**permalink**) 10-12-2012, 09:47

Looks amazing. Not going to pass on this one.

dxdave · #21 (**permalink**) 10-30-2012, 23:53

I would think a DX version would easily hit the $500 mark.

histrionics · #22 (**permalink**) 11-01-2012, 23:46

I doubt there will be a DX Hulk. Notice Hot Toys has never produced a Marvel DX. Only DC and other random characters. The Hot Toys Marvel licenses always stipulate "Limited Edition" for every figure. I don't know what that really means in terms of numbers.

Now I do think they will make another better version of the Hulk (think, cash grab) as long as the character appears in any upcoming Avengers or self-titled film. That is inevitable!

The Pawn · #23 (**permalink**) 11-13-2012, 10:25

Quote:

Originally Posted by histrionics

I doubt there will be a DX Hulk. Notice Hot Toys has never produced a Marvel DX. Only DC and other random characters. The Hot Toys Marvel licenses always stipulate "Limited Edition" for every figure. I don't know what that really means in terms of numbers.

Now I do think they will make another better version of the Hulk (think, cash grab) as long as the character appears in any upcoming Avengers or self-titled film. That is inevitable!

Yep, Avengers 2 coming out in 2015.